New Products on SteelNavel.com

Stainless Steel Labret with Acrylic Cone

service@steelnavel.com(Steel Navel Body Jewelry) — Wed, 3 Mar 2010 14:24:12 PST

Stainless Steel Labret with Acrylic Cone
This stainless steel labret has a very thin disk on one end and an externally threaded acrylic cone on the other end. The 16 gauge labret has a 5/32" disk and a 3/16" cone. The 14 gauge labret has a 3/16" disk and a 1/4" cone. Both the 16 gauge and 14 gauge labret have a 5/16" wearable distance between the disk and cone.

Stainless Steel Labret with Glow-in-the-dark Ball

service@steelnavel.com(Steel Navel Body Jewelry) — Wed, 3 Mar 2010 11:50:10 PST

Stainless Steel Labret with Glow-in-the-dark Ball
This stainless steel labret has a very thin disk on one end and an externally threaded acrylic glow-in-the-dark ball on the other end. The Blue, Green, and White colors glow best in the dark and under black light. The 16 gauge labret has a 5/32" disk and a 1/8" ball. The 14 gauge labret has a 3/16" disk and a 5/32" ball. Both the 16 gauge and 14 gauge labret have a 5/16" wearable distance between the disk and ball. The green color looks yellow here but is a translucent light green.

Acrylic Single Flared Logo Plug

service@steelnavel.com(Steel Navel Body Jewelry) — Thu, 25 Feb 2010 13:39:53 PST

Acrylic Single Flared Logo Plug
This acrylic single flared plug is available with your choice of five logo images.

The logo image is encased in a slightly rounded dome of acrylic
The back of the plug is flat and grooved for the included o-ring
2g through 0g have a 5/16" wearable area
00g through 1/2" have a 3/8" wearable area
9/16" through 1" have a 7/16" wearable area

Please be aware that these are molded plugs and the back ends tend to have a textured look. Some may look a bit "scuffed" on the end but this is just how they are made. Apparently it's the texture of the mold.

Acrylic Single Flared Rasta Plug (5 stripes)

service@steelnavel.com(Steel Navel Body Jewelry) — Thu, 25 Feb 2010 12:49:14 PST

Acrylic Single Flared Rasta Plug (5 stripes)
This single flared acrylic plug has the black, red, green, and gold colors of the Rastafari movement. Black stands for Africa, red stands for blood, green stands for the vegetation of Africa, and gold stands for the prosperity Africa had to offer before most of the gold and diamonds were extracted during slavery. It also represents the sun, which gives everything to life. This Rasta plug is grooved on the end to hold the included o-ring in place. The wearable area of all gauges is 5/16".

Sterilized Internally Threaded Titanium Gem Navel Barbell

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 23 Feb 2010 15:03:51 PST

Sterilized Internally Threaded Titanium Gem Navel Barbell
This titanium curved navel barbell is sterilized using EO gas sterilization. It comes packaged in a sealed pouch. This high polish titanium curved barbell is internally threaded with a fixed 8mm bottom gem ball and a threaded 5mm top gem ball.

This curved barbell is 14g and 1/2" long making it ideal to take to your piercer for an initial navel piercing or to replace your existing navel jewelry. Please see our EO gas sterilization FAQ for more details about the sterilization process.

Sterilized Internally Threaded Titanium Curved Barbell

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 23 Feb 2010 14:44:12 PST

Sterilized Internally Threaded Titanium Curved Barbell
This titanium curved barbell is sterilized using EO gas sterilization. It comes packaged in a sealed pouch. This high polish titanium curved barbell is internally threaded with 4mm balls.

This curved barbell is 14g and 7/16" long making it ideal to take to your piercer for an initial navel piercing or to replace your existing navel jewelry. Please see our EO gas sterilization FAQ for more details about the sterilization process.

Sterilized Internally Threaded Titanium Straight Barbell

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 23 Feb 2010 14:31:20 PST

Sterilized Internally Threaded Titanium Straight Barbell
This titanium straight barbell is sterilized using EO gas sterilization. It comes packaged in a sealed pouch. This high polish titanium straight barbell is internally threaded and has 3/16" balls.

This straight barbell is 14g and 3/4" long making it ideal to take to your piercer for an initial tongue piercing or to replace your existing tongue jewelry. Please see our EO gas sterilization FAQ for more details about the sterilization process.

Sterilized Pre-bent Titanium Nostril Screw with Bezel-set Gem

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 23 Feb 2010 14:03:29 PST

Sterilized Pre-bent Titanium Nostril Screw with Bezel-set Gem
This titanium nostril screw is pre-bent and sterilized using EO gas sterilization. It comes packaged in a sealed pouch. This high polish titanium nostril screw measures about 1/4" from the bend to the back of the tiny bezel-set end. The gem is about 1/16" across.

Available in both 20g and 18g, this nostril screw is ideal to take to your piercer for an initial piercing or to replace your existing jewelry. Please see our EO gas sterilization FAQ for more details about the sterilization process.

Stainless Steel Taper

service@steelnavel.com(Steel Navel Body Jewelry) — Wed, 17 Feb 2010 17:42:35 PST

Stainless Steel Taper
These stainless steel tapers are used to stretch your piercing to the gauge of the taper. For example, the 14 gauge taper will stretch your piercing from 16 gauge to 14 gauge.

The 14g and 12g tapers are about 1-1/4" long.
The 10g through 4g tapers are about 1-1/2" long.
The 2g through 00g tapers are about 1-7/8" long.

Stainless Steel Taper Kit

service@steelnavel.com(Steel Navel Body Jewelry) — Wed, 17 Feb 2010 16:42:57 PST

Stainless Steel Taper Kit
These stainless steel tapers are used to stretch your piercing to the gauge of the taper. For example, the 14 gauge taper will stretch your piercing from 16 gauge to 14 gauge.

Each kit contains three tapers with two o-rings on each taper. Each taper kit costs $3 less than if you buy the three tapers individually. Plan ahead for future stretches and save!

The 14g and 12g tapers are about 1-1/4" long.
The 10g through 4g tapers are about 1-1/2" long.
The 2g through 00g tapers are about 1-7/8" long.

Silicone Glow-In-The-Dark O-Ring

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 9 Feb 2010 14:17:17 PST

Silicone Glow-In-The-Dark O-Ring
These glow-in-the-dark o-rings are only available for a limited time and only in certain gauges and colors.

These O-rings glow under black light and in the dark. Please use the following notes to help you choose the correct o-ring for your jewelry:

For plugs, spools, eyelets, retainers, or any other jewelry that is NOT tapered, select the o-ring that has the same gauge as your jewelry.
For all TAPERED products such as claws, horns, pinchers, spirals and wearable tapers, select an o-ring one gauge smaller than the gauge of the jewelry.

Pair of Glass Double Flared Glow-In-The-Dark Plugs

service@steelnavel.com(Steel Navel Body Jewelry) — Mon, 8 Feb 2010 15:43:24 PST

Pair of Glass Double Flared Glow-In-The-Dark Plugs
The wearable area is about 1/4". The back flare is smaller than the front flare for easier insertion.

These are Non-Toxic, Non Radioactive, Non Carcinogenic, and Non hazardous according to the manufacturer of this special glass. The plugs need to be "charged", preferably with strong light, about 1 inch from artificial (florescent, incandescent, Halogen) light source. Black light and direct sunlight work too. The amount of glow time is determined by how long the glass was charged and how strong the light source is. They can hold a charge for up to 8-10 hrs with proper charging. They will glow brighter for the first 1-2 hours then hold a less intense glow for the rest of the night. It is suggested to charge them right before going into darkness. A portable LED flashlight or black-flashlight can recharge them on the go. The aqua glows a little bit brighter than the yellow/green.

Pair of Glass Single Flared Glow-In-The-Dark Plugs

service@steelnavel.com(Steel Navel Body Jewelry) — Mon, 8 Feb 2010 14:30:14 PST

Pair of Glass Single Flared Glow-In-The-Dark Plugs
The overall length of the wearable area is 1/2" long. This makes the wearable about 1/4" to 5/16" long depending on where you put the included black o-rings.

These are Non-Toxic, Non Radioactive, Non Carcinogenic, and Non hazardous according to the manufacturer of this special glass. The plugs need to be "charged", preferably with strong light, about 1 inch from artificial (florescent, incandescent, Halogen) light source. Black light and direct sunlight work too. The amount of glow time is determined by how long the glass was charged and how strong the light source is. They can hold a charge for up to 8-10 hrs with proper charging. They will glow brighter for the first 1-2 hours then hold a less intense glow for the rest of the night. It is suggested to charge them right before going into darkness. A portable LED flashlight or black-flashlight can recharge them on the go. The aqua glows a little bit brighter than the yellow/green.

Stainless Steel Nose Hoop

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 2 Feb 2010 15:32:39 PST

Stainless Steel Nose Hoop
This nose hoop has a small 2mm end. These are much easier to insert and remove than captive bead rings. They are made from 316L stainless steel.

Acrylic Single Flared Tie Dye Plug

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 2 Feb 2010 15:15:48 PST

Acrylic Single Flared Tie Dye Plug
This acrylic single flared tie dye plug may have a spiral design or they may be swirly. Each plug has a groove to hold the included o-ring in place. All gauges are about 1/2" long with a wearable area of about 5/16" between the o-ring and flare.

Please be aware that these are molded plugs and the ends tend to have a textured look. Some may look a bit "scuffed" on the end but this is just how they are made. Apparently it's the texture of the mold.

PVD Stainless Steel Nose Hoop

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 2 Feb 2010 12:57:20 PST

PVD Stainless Steel Nose Hoop
This nose hoop has a small 2mm end. These are much easier to insert and remove than captive bead rings. They are made from 316L stainless steel and the color coating is PVD.

Acrylic Heart Pincher

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 2 Feb 2010 12:12:43 PST

Acrylic Heart Pincher
This acrylic pincher is great for healed septum or ear piercings. The inside diameter for gauges 6 through 0 is 3/4" and the inside diameter of the 00g is 7/8".

Stainless Steel Industrial Barbell with Round and Star Gems

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 26 Jan 2010 12:09:53 PST

Stainless Steel Industrial Barbell with Round and Star Gems
Add a little bling to your industrial piercing with this 14g 1-1/4" straight barbell with 2 star gems and 1 round gem. A fun way to dress up your piercing!

Stainless Steel Industrial Barbell with 3 Offset Stars

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 26 Jan 2010 11:59:03 PST

Stainless Steel Industrial Barbell with 3 Offset Stars
Add a little bling to your industrial piercing with this 14g 1-1/4" straight barbell with 3 off-set gem stars. A fun way to dress up your piercing!

Stainless Steel Industrial Barbell with 3 Inline Stars

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 26 Jan 2010 11:46:17 PST

Stainless Steel Industrial Barbell with 3 Inline Stars
Add a little bling to your industrial piercing with this 14g 1-1/4" straight barbell with 3 in-line gem stars. A fun way to dress up your piercing! ** Stars are centered, but may NOT always be in a perfectly straight line **

Titanium Captive Bead Ring with Titanium Bead

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 26 Jan 2010 11:12:21 PST

Titanium Captive Bead Ring with Titanium Bead
This economical titanium captive bead ring as available in nine annodized colors. Both the ring and bead are titanium and annodized the same color.

Ultra Premium Tattoo Potion Number 7 Moisturizer

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 19 Jan 2010 15:13:48 PST

Ultra Premium Tattoo Potion Number 7 Moisturizer
Tattoo Potion number 7 is an everyday use lotion designed to enhance the look and longevity of your tattoo, making it look as vibrant and colorful as the first day you left the parlor. If you�re tired of having a faded tattoo, or just feel you need to reinvigorate its look, then you are just the person Potion number 7 was made for.

An all-natural, water based product made with vitamins and minerals, Tattoo Potion number 7 will leave your skin and tattoo looking healthy and smooth. Certified and produced by an FDA approved pharmaceutical manufacturer, number 7 is a safe and useful product applied to achieve that lively and dynamic tattoo appearance.

FOR BEST RESULTS:
Begin applying Tattoo Potion number 7 two and a half weeks after receiving tattoo or when tattoo has fully healed. In order to maximize longevity and color-retention, apply at least 3 times per day or as needed to keep skin and tattoo healthy and moist.

Stainless Steel Single Flared Three Heart Eyelet

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 5 Jan 2010 11:02:14 PST

Stainless Steel Single Flared Three Heart Eyelet
This stainless steel single flared eyelet has three hearts on one end and is open on the other. This single flared eyelet, made from 316L implant grade stainless steel, is available in gauges from 2 gauge up to 1" gauge. All gauges are 1/2" long and have a 5/16" wearable surface. All gauges are grooved for the included o-ring.

Stainless Steel Single Flared Three Star Eyelet

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 5 Jan 2010 10:58:06 PST

Stainless Steel Single Flared Three Star Eyelet
This stainless steel single flared eyelet has three stars on one end and is open on the other. This single flared eyelet, made from 316L implant grade stainless steel, is available in gauges from 2 gauge up to 1" gauge. All gauges are 1/2" long and have a 5/16" wearable surface. All gauges are grooved for the included o-ring.

Pair of Bone Belitungs

service@steelnavel.com(Steel Navel Body Jewelry) — Tue, 5 Jan 2010 09:45:39 PST

Pair of Bone Belitungs
Belitungs are hand carved from cow bone and sold as a pair.

They range in length from about 2-1/4" to 2-1/2". 10g, 8g, and 6g are about 2-1/4" long.
4g, and 2g are about 2-3/8" long.
0g, and 00g are about 2-1/2" long.